Had a bit of time from getting home from work until it got too dark out. The lighting in the garage is poor at best so for now I need decent daylight to work in there. So I prepped a strip to meet at the stern with the other strip and then glued the strip on. Pretty straight forward. I also stopped on the way home and got a bunch more clamps (still on sale for 99 cents) and 4 more rolls of tape as I’ve already gone through two.
There really is no template or easy way to fit the strip, rather just hold it in place, look for what has to be removed and plane some away. Put back in place, judge your progress, adjust angles if necessary and continue to plane. It only took about 5 minutes to get this planed down and fitting tightly to the previous strip and to the neighboring strip across from it. Of course gluing the strip down took a lot longer.